当前位置:返回首页 > 新闻动态 > 技术文档 > 新闻中心

全自动压瓦机A大棚卡膜槽压瓦机设备使用说明

发布者:智博机械 发布时间:2019-09-11

全自动压瓦机A大棚卡膜槽压瓦机设备使用说明

3.jpg

一.   安装接线Install the wiring

●设备电源为3380V50HZ3进线RST,。设备电机接UVW。油泵电机接U1V1W1N所有电磁阀的公用线,剪切下限电磁阀接K1,剪切上限电磁阀接K2

Machine power supply for 3 fire, fire R, S, T, 3 phase. Pressure, mechanical and electrical machine to meet U, V, W. The oil pump motor connect U1, V1, W1. N common line of electromagnetic valve, knife solenoid valve after K1, electromagnetic valve after K2.

接线时要有专人看护,注意安全。设备接安全地线。

When wiring to have someone care, pay attention to safety. Equipment safety earthed.

二.  触摸屏操作说明The touch screen operation instructions

●触摸屏的数据设置一般用手直接点击数据或者功能按键,(最好用手机触摸笔,严禁使用硬物或尖锐工具点击),设置数据时在弹出的小键盘直接点击数字键,从高位向低位。Touch screen data set general directly click data by hand or function keys, (had better use mobile phone stylus, it is strictly prohibited to use hard objects or sharp tools click), set up the data on the small keyboard directly click on the number keys, from high to low开机画面:开机画面 单击中文再点击进入

Startup screen Click to enterr

●全自动压瓦机A大棚卡膜槽压瓦机设备使用说明生产设置画面:

此画面为中文工作以及监控画面

在任务后面的输入框输入需要的尺寸 再在其后面输入需要的根数

当前产量第一个时监控当前长度 第二个是监控工作多少张板

切刀升 切刀降  冲孔升 冲孔降 都是点动控制 开启自动 需要冲孔以及切断全部升至上限

并且清零当前长度以及张数

若是板材与切刀对齐 点击齐头 点击 长度清零 若是板材与冲孔对其 点击齐头即可

Enter the required size in the input box after the task and enter the required number after it.

The current output is the first to monitor the current length. The second is to monitor how many plates are working.

Medium hole rise, medium hole drop, cutoff, rise, cutoff, drop, all are jog control, turn on automatically, need punching, and cut all up to the upper limit.

And clear the current length and the number of sheets

参数设置

Parameter Settings

 注意:

脉冲系数为固定的30001200020000,请不要随意更改

此系数非专业人员勿动

减速距离 150-200之间能确保尺寸的准确性

切口补偿: 为无极切断时刀口的宽度

模具一切刀 为切刀模具中间至冲孔模具中间的距离

The pulse coefficient is fixed at 3000 or 12000 or 20000. Please do not change it at will.

This coefficient is not for professionals

Deceleration distance ensures the accuracy of the size between 150-200

Incision compensation: the width of the knife edge when the electrode is cut

Knife-middle die is the distance from the middle of the cutter die to the middle of the punching die

Stop inertia is the distance from the machine to the complete stop.

The stop delay is the length of time after waiting for punching or cutting. 1 is generally 30

订单画面:

本系统支持 15种孔的记忆设置 单位为MM 设置为孔到孔 第一个孔为切口到孔

 三.  全自动压瓦机A大棚卡膜槽压瓦机设备使用说明基本操作Three basic operations

●开机先选择语种,弹出手动画面,手动画面的切断、返回、前进、后退都是点动操作,即按住时起作用,离开时停止。

Boot to choose language, pop-up manual screen, manual screen cut off, back, forward and backward is inching operation, which hold the work, when to stop when they leave.

在此画面可以进行 长度修正 具体修正方法如上图

注意事项:

    1:使用冲孔时,入料后使用齐头,中途使用启动/暂停,且中

途不可以清零长度和数量,否则机器可能会把机器内现存的材料切废。

    2:使用冲孔时,一定设置好刀口补偿,并按照设定长度设置。

产品有误差时用长度修正里的脉冲系数修正,不可随意更改设置长度。

切口位置有偏差时使用长度修正里的刀口校正调整。校正方法输入

设置长度实际长度,然后按重新计算。刀口有废料时,

际长度等于测量长度加废料长度。

    3:脉冲系数不可以在使用中更改,只可以重新计算。

   Machine to choose the language, the pop-up manual screen, manual screen cut off, back, forward and backward are inching operation, which hold the work, when to stop when they leave.

Press forward, take the plate away to the outside of the cutter, start the pump, hold down the neck, cut off the plate to cut off the selected automatically, into the image automatically, automatic screen has two Settings, two monitoring options, one is the length of two items of set, one is a number, set up is completed, click start, and tile press start to work, to stop and cut off when the set length, and then continue to run, until the number of sheets is complete stop production. Midway stop as long as according to stop, press start to continue. Reset is usually compulsory removal when debugging the current production.

 附:调节变频器旋钮可以调节机器速度。

Add: inverter control can adjust the machine speed adjustment.

四.常见操作故障及排除方法Troubleshooting:

 ● 手动能工作,自动不能工作:Manual work, automatic does not work:

     可能产生的原因:订单张数或者总数量没有设定

Possible reasons: the order number or the total quantity is not set

解决方法:检查或重新设定生产画面状态下的订单张数或者总数量。

Solution: check or reset the production pictures of order number or the total number.

手动自动都不工作,显示屏没有显示anual doesn't work automatically, display screen are not shown

可能产生的原因:1电源不正常1 power supply not normal

             解决方法:检查电源3380V±10%

             Check the power supply three phase 380 v + / - 10%.

2保险丝熔断。Blown fuse

解决方法:更换并检查电磁阀线有没有损坏。(保险丝型号6A

Solution: replace the electromagnetic valve and check the line if there is any damage. (fuse model 6 a)

只要开自动切刀一直向上走:

As long as the open automatic cutter has been going up:

可能产生的原因:上限位开关断路性损坏。

Maximum possible reason: a switch circuit damage

      解决方法:更换剪刀上限位开关 

Solution: replace the scissors limit switch

 

只要一开油泵,切刀一直向下或向上:

As long as the oil pump, cutter has been upward or downward:

可能产生的原因:电磁阀卡住

Possible reasons: the electromagnetic valve is stuck.

解决方法:关掉油泵,用螺丝刀从电磁阀两端来回推动电磁阀的手动复位销。直到感觉到有弹性时止。Solution: turn off the oil pump, with the screwdriver from solenoid valve solenoid valve manual reset pin back and forth at both ends. Until the stop when feel resilient.

 ★★特别提示:U u special tips

 如果电磁阀经常卡住,应换油并清洗电磁阀。

If electromagnetic valve gets stuck, often should clean oil change and solenoid valve.

五.其他注意事项Matters needing attention

任何时候不能把手或异物伸入刀口。机器操作人员应具备一定电器常识和机械的操作经验。需要接线时应由专业人员操作。

any time cannot handle or foreign body into the blade. Machine operation personnel should possess certain electrical sense and mechanical operation experience. Need wiring should a professional operation.

电器柜应避免日晒雨淋。计数器避免硬物撞击。计数器不在保修范围。 electrical cabinets should avoid weathered. Hit counter to avoid hard objects. Counter to be outside the scope of the warranty.

滑道、模具等滑动部件注意经常加注润滑油。各部位螺丝经常检查并紧固。Sliding parts, such as 3 slide, the mould attention often filling lubricating oil. The different parts often check and tighten screw.

各部位接线必须牢靠。 parts connection must be reliable.

设备接安全地线。equipment safety earthed.

全自动压瓦机A大棚卡膜槽压瓦机设备使用说明

新品推荐